How to install the switch wireless human body sensor that can sense even when the radar person is not moving

In today's ever-changing science and technology, we increasingly rely on various technological products to improve our quality of life. Among them, the wireless body sensor is a very practical and technological product. Radar body sensors, in particular, can accurately sense the presence of people even when they are not moving, and then control switches or other devices. So, how should this amazing radar body sensor be properly installed? This article will explain the installation steps in detail.

First, product introduction

First, let's take a look at the product. Radar body sensor is a device that uses radar technology to sense human movement. Its main function is to detect the movement of the human body within a certain range, and transmit the signal to the corresponding equipment through wireless signals, such as smart home systems, lighting systems, etc. The main feature of this sensor is that it is not affected by ambient temperature, humidity, etc., and is harmless to the human body.

Second, installation steps

Choose the right location

Before installing the radar body sensor, we need to choose a suitable location. This position should be able to maximize the sense of human activity, while not affecting people's normal life. For example, if you are going to use it to control the lighting system in your home, then you should install it in the main passage, bedroom and other places that are often passed by people.

Prepare tools and materials

Before starting the installation, you need to prepare some necessary tools and materials. The components include screwdrivers, electric drills, expansion screws, and insulation tapes.

Install power supply and receiver

Prepare the power cord and receiver for the radar body sensor, and then connect them together. Ensure that the positive and negative terminals of the power cable are correctly connected to avoid damage to the device.

Fixed inductor

Use an electric drill to drill a hole in the selected position, and then put the expansion screw into the hole and secure it with a screwdriver. Point the housing of the radar body sensor at the wall and press the sensor down with your hand until you hear a click. Use a screwdriver to tighten the screws.

Connecting signal line

Insert the signal cable of the radar body sensor into the jack of the receiver to ensure that the connection is secure. The receiver's signal line is then connected to the corresponding device, such as a smart home system, lighting system, etc.

Third, precautions

Before installing the radar body sensor, ensure that the power is turned off to avoid electric shock.

In the process of installing the sensor, avoid too much or too strong force to avoid damage to the shell or internal parts.

When connecting the signal line, ensure that the connection is firm to avoid poor contact or short circuit.

If there are other electronic devices near the installation location, they need to be isolated so as not to interfere with each other.

Before using the radar body sensor, it is necessary to test it to ensure that it is working properly. If there is any problem, it needs to be repaired or replaced in time.

Iv. Summary

Although the installation process of radar body sensor is relatively simple, there are many matters that need attention. Only properly installed, in order to ensure its normal work, and thus improve our quality of life. If you are not very familiar with this aspect, it is recommended to ask a professional installer to install. This can ensure the correctness and security of the installation, but also to avoid some unnecessary trouble.

I hope this article will help you to successfully install radar body sensors and enjoy the convenience and comfort brought by technology. If you have any questions or suggestions, please feel free to contact us and we will reply as soon as possible.