Smart home home finished radar sensor switch installation precautions

Precautions for the installation of radar sensor switches in smart home household products. In today's technological era, radar sensor switches are also very common at home, and many families also use this sensor switch product when decorating.

Induction switch classification:

Human body induction: An automatic control product based on radar technology. When a person enters the induction range, a special sensor will detect the changes in the reflected electromagnetic waves of the human body and automatically connect the load. If the load does not exceed the detection range, the load will continue to connect. Loads are automatically delayed and turned off after people leave. Realize human lights, human lights, safety and convenience, environmental protection and energy saving, reflecting humanized care.

Infrared detection: generally used for automatic control of street light switches in public places, it is composed of infrared detection circuit, infrared signal processing circuit, signal output control switch circuit, and main parts of power supply circuit. Infrared signal processing integration mainly completes infrared signal processing. The circuit power supply supplies power to each sub-circuit of the designed circuit according to the circuit requirements of each part to ensure the stability of the circuit. The infrared detection switch has the advantages of long detection distance, wide application range, strong anti-interference ability and stable working performance.

How to install the finished smart home radar sensor switch? The installation of radar sensor switches can be divided into external and embedded switches. The embedded sensor switch can be installed directly in the lamp without affecting the detection function. Installation Instructions Connect to Live, Neutral and Neutral. Once the wiring is connected, place the switch in the light. The left and right sides of the installed switch are wider than the upper and lower sides. Therefore, when installing the switch, please make sure that the two axes are as perpendicular to the humane direction as possible for better detection. Power up after installing the switch. When the ambient light is sufficient, the bulb will flicker. After 1 minute of initialization, the switch enters the monitoring state, covers the ambient light with an object, and the switch enters the working state. If people don't leave the area, the switch will continue to work. When people leave, the switch automatically delays the load from turning off. If the delay time or material sensitivity value is not satisfied, it can be adjusted through the back of the sensor switch. Delay and light sensitivity values can be adjusted.

The installation of the induction switch is not complicated. During the installation process, the relevant specifications should be strictly followed. The finished smart home radar sensor switch will bring convenience to our life, but also enrich the mood of life, the light is soft and comfortable, giving you a different space experience.