Microwave Induction Solution Radar Induction Switch Solution Ten Advantages of Lighting Application

Microwave Induction Solution Radar Induction Switch Solution Ten advantages of lighting applications, at present, most underground garages can't actually solve this problem in terms of lighting and energy saving. After purchase, in order to reduce the budget of ordinary lighting equipment in the market, energy consumption is not considered, the quality is average, the lamp is broken, and it is directly purchased in the market or on the Internet, the quality is uneven, the lighting effect and energy consumption will not be changed, and the management quality will be improved.

Microwave radar induction not only has high sensitivity, wide coverage, 360 ° no dead angle, can penetrate non-metallic objects, and is not affected by temperature and environment. Even in hot summer, the sensing distance of the radar sensor switch of the underground garage will not decrease. The corresponding speed is fast, the sensor is built-in, the same as general lighting equipment, the probability of false transmission is low, and the brightness of the sensor light can be changed from 10 to 100.

The sensor head of the infrared sensor should be exposed, which affects the appearance. The length of the sensing distance of the sound and light control induction lamp is related to the sound decibel. The lights are always on when the live ambient sticker is noisy. When the sound is too low, the light may not turn on. Induction probes that have been used for a long time are likely to be contaminated by dust, resulting in decreased sensitivity. This affects the sensing function. It is greatly influenced by the outside world.

At present, most parking lots use microwave induction scheme radar induction switches, which automatically turn off 15-20 seconds after leaving. It can achieve energy saving effect, prolong the service life of lamps and lanterns, safe and convenient!

The composition of radar sensor switch light includes LED light source, driving power supply, sensor, anti-jamming antenna, etc., providing low power consumption, long life, high brightness and environmental protection. It can be used not only in underground parking lots, but also in public places that require long-term lighting, such as warehouses, libraries and corridors.

Radar sensor switch solution Lighting: radar detection function: when there is a moving object, radar detection action, switch. When there is no moving object, the lamp is dimly lit. Induction distance: 6-15 meters, 120 degrees under the light; range of use: especially suitable for community corridors, basements, garages, etc. Garage LED radar sensor switch solution, as we all know, garage lighting uses 40W fluorescent lamps. In order not to affect normal use, it is usually on for 24 hours, which will greatly shorten the service life of fluorescent lamps. Generally, it is replaced in about 1.2 years. The emergence of LED radar sensor switch lights can replace fluorescent lamps, which can achieve good energy-saving effects and delay the service life of lamps.

Ordinary LED lights have two major drawbacks. First, the decay is rapid due to the long-term effects of high temperature. Second, wasting electricity in the middle of the night when no one was there. Because the lighting of the underground parking lot is continuous lighting for a long time. Therefore, in order to solve the lighting problem of the underground parking lot, it is necessary to greatly extend the service life of LED lights and save energy. Therefore, the parking lot environment should be considered to realize humanization and intelligence. There is a new market demand for underground parking lot lighting. Only companies with smart sensing technology can provide microwave sensing solutions and LED smart lighting solutions for underground parking lots.

LED radar sensor switch solution:

1. Using the Doppler principle to develop radar sensors, intelligently detect the movement of objects in the surrounding environment, and automatically adjust the working state.

2. Quiet and low lighting power consumption can be adjusted according to the environment.

3. When the object enters the radar sensing area, it will automatically work at full load.

4. Full load working time: 5 to 60 seconds, the time is adjustable.

5. Induction sensitivity: 3-15 meters;

6. It is suitable for lighting places such as underground parking lots, shopping malls, stairs and so on.

7. Wide voltage input, voltage input.

The microwave radar sensor switch solution uses the Doppler principle to transmit 5.8GHz microwave radar signals. After the moving object enters the radar sensing range, it can feedback the signal to the receiving circuit to change the working state of the circuit. Generally speaking, the sensing distance can reach 0.5-15 meters, and it can be triggered when the object moves. Although the object is within the trigger range, it still won't trigger. Radar detection can penetrate non-metallic objects such as wooden boards and plastics. Radar detection is less affected by interference and has high sensitivity. It is especially suitable for lighting solutions in underground parking lots.