Underground garage parking lot radar body sensor finished LED lighting solution

Underground garage parking lot radar body sensor finished LED lighting solution,Is the LED light installation radar sensor reliable? Does it work? With the improvement of people's living standards, more and more people buy cars. This has led to the massive construction of underground garages, and the increase in underground parking has also led to an increase in electricity consumption. Solving this problem has become a top priority. At present, there are three kinds of human infrared sensor lights, voice control, radar human body sensor products on the market. The radar sensor LED light is the most suitable of the three sensor lights. Why do you say that? let us see.

The finished radar body sensor has high sensitivity, long detection distance, wide angle, no dead angle, can penetrate glass and thin plates, and is not affected by the environment. In a normal temperature environment, temperature and dust will not affect the normal sensing function. The reflection speed is fast, the built-in detection module does not affect the appearance, and the detection error is small. Therefore, when the speed reaches 25 km/h, the radar sensing can also trigger the range of the vehicle to be 5-20 meters away from the light, changing the lighting device from low light to full brightness.

Let's talk about the shortcomings of the current human infrared induction and voice-activated induction

Disadvantages of infrared induction LED lights: the induction distance is general, the angle is small, and it is greatly affected by the environment, temperature, dust, etc., and the induction distance is short in a high temperature environment. The infrared sensor head needs to be exposed, which is inconvenient to install.

Disadvantages of voice-activated sensing lights: The sensing distance is related to the sound emitted by the object. The lights may always be on when the surrounding environment is noisy. When it's too quiet, it may not be triggered and can be severely affected by the environment, temperature, dust, etc.

Nowadays, most underground garages use the finished radar body sensor to achieve the effect of lights on when people come and lights off when people leave. Eliminate energy waste, prolong the service life of lamps, save energy, and be safe and environmentally friendly. The structure of the finished radar body sensor is basically divided into lighting, drive circuit, detection module, cooling device, low power consumption, longevity, high light efficiency, environmental protection, etc. It is not only suitable for underground garages, but also for corridors, warehouses and other lighting places.

Through the above introduction, you now know whether the underground garage is suitable for installing the finished radar body sensor, if you have any questions, please contact us.

Underground parking lot radar sensor switch lighting solution! Underground car parks are now the norm for large office buildings, and as more and more underground car parks are built, using traditional 24-hour lighting can waste a lot of electricity, especially when there are no staff at all, in order to solve this dilemma , The finished radar body sensor is widely used, and its intelligent unified management can realize intelligent energy saving. save costs.

The status of the underground parking lot:

1. The underground garage is located under the building and has almost no natural lighting, requiring 24 hours of lighting per day.

2. There is no time control for the entry and exit of vehicles in the garage. While rush hour is mainly concentrated during the commute, vehicles will also come in and out at other times to meet lighting needs.

3. Considering the operating cost, the underground garage lighting generally only turns on part of the light, so that the light is dimmed and the flow of people is small, which often provides favorable conditions for criminals and is an area with weak security management.

4. Voice-activated lighting is rarely used at this stage. Infrared control lighting instruments, but the application of this control is very few, there is no system, no scale, low technical content, and poor development prospects.

Radar human body sensor finished solution:

1. Energy saving: Based on LED lighting, the energy consumption is reduced by more than 80%, the light is on when people come, and the light is off when people leave, saving costs.

2. Intelligent tracking: Improve user lighting experience and realize the lighting Followme function.

3. Automatic switch off: linear change from 10 to 100, which makes the eyes more comfortable and is a symbol of high experience and quality of life.

4. Safety linkage: no dead angle monitoring, efficient management, changing from passive safety to active safety, reducing operating costs.

5. Remote control: realize remote programmable control through the gateway, flexibly edit various programs, and realize large-scale remote control.

6. Data support: transmission or cloud data analysis.

The finished product solution of radar body sensor is the current lighting solution, and its intelligent, energy-saving, environmentally friendly and healthy lighting is deeply loved by the majority of users.