Microwave human body sensor radar sensor switch replaces the installation of traditional lamps LED radar corridor

The microwave human body sensor radar sensor switch replaces the installation of the traditional lamp LED radar corridor. With the development of the times, people's awareness of energy saving is getting stronger and stronger. For example, stair entrances or small parking lots, garages, passages and other environments are not always occupied. To save electricity, microwave body sensors can be installed to save energy. When a person or car moves in the sensing area, the switch is triggered and the lights are turned on.

LED radar sensor switch: using the Doppler principle. The microwave radar sensor emits high-frequency electromagnetic waves (5.8GHz) to detect changes in the echoes and echoes of small movements within the detection range. The microprocessor then triggers the light. The microwave detection angle of this product is 360 degrees and adopts advanced microwave detection technology.

1. Main functions

1. Energy-saving light sources can replace traditional incandescent lamps and energy-saving lamps.

2. Anti-interference design, can prevent mutual interference between close installations.

3. Give full play to the integrated characteristics of lamps, electrical appliances and lighting.

4. Replace traditional incandescent lamps, saving energy up to 80%.

5. Green products do not contain lead, mercury and other heavy metals and harmful gases.

6. DC drive, no stroboscopic, effectively protect eyesight.

7. No ultraviolet radiation and electromagnetic radiation, which is safer for human body.

8. Long life. The service life can be up to 5 years!

Two: Precautions.

1. The rated voltage is 120-277VAC. When connecting the power supply, make sure that the operating voltage is within the range.

2. In order to ensure the safe and normal use of the product, please strictly abide by the instructions and precautions in the user manual.

3. Before installing the microwave human body sensor radar sensor switch, it is good to confirm whether the local installation environment supports this product, and install it in a stable place to prevent vibration and shaking. Radar sensor switches have a very wide application market, they can be seen in many places around us, bringing convenience to our life and improving the quality of life.

Is the LED radar sensor switch suitable for installation in the corridor? With the development of science and technology and the improvement of energy-saving awareness of consumption, LDE is basically used for household and public lighting. Traditional energy-saving lamps began to gradually withdraw from the market and were replaced by microwave human body sensor LEDs. Induction lights are basically used in public areas, such as stair entrances, parking lots, garages, passages and other public places. Induction lamps are used for energy saving, and radar induction switch LED lamps are more environmentally friendly, more energy-saving and more applicable than energy-saving lamps. The radar sensor switch LED can realize the lights when people come and go out!

LED radar sensor switch functions and features:

1. Intelligent induction: no need to make a sound (clapping, etc.), the probe is not exposed, the induction is sensitive, the lighting function is intelligently sensed, the light intensity is adaptive, and it is not affected by the surrounding temperature.

2. Compared with infrared products: the detection distance of the radar sensor switch LED light is longer, the angle is wider, and there is no dead zone. It can penetrate glass and thin sheets and is not affected by the environment and temperature. It is an ideal replacement for infrared induction and sound and light control induction lamps.

In scenes such as corridors with large crowds and low lighting time requirements, the use of LED radar sensor switches can achieve good energy-saving effects, in line with today's concept of energy conservation and environmental protection, and sustainable development.